Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 - Manual (Page 2)

i
IM 11M12A01-03E
IM 11M12A01-03E
7th Edition: Sep. 2006 (YK)
All Rights Reserved, Copyright © 2000, Yokogawa Electric Corporation
Introduction
The EXAxt ZR Separate-type Zirconia High-temperature Humidity Analyzer has been
developed for humidity control in various industrial processes. This analyzer basically
consists of a detector and a converter. You can select between several versions based
upon your application.
Optional accessories are also available to improve measurements and automate calibra-
tion. An optimal control system can be realized by adding appropriate options.
This instruction manual refers to almost all of the equipment related to the EXAxt ZR.
You may skip any section(s) on the equipment which is/are not included in your system.
Regarding the HART communication protocol,refer to the IM 11M12A01-51E.
IM 11M12A01-51E has been published as Model EXAxt ZR Series HART Protocol
The all-in-one version (with sensor and analyzer integrated in one body) is described in
IM 11M12A01-05E
< Before using the equipment, please read any related descriptions in this manual for the
equipment and the system you have, on appropriate use and operation of the EXAxt ZR. >
Models and descriptions in this manual are as follows:
Models and descriptions in this manual
Description in this manual
Model Product Name Specification Installation Operation Maintenance CMPL
ZR22G General-use detector
᭺ ᭺ ᭺ ᭺
ZR402G Converter
᭺ ᭺ ᭺ ᭺ ᭺
ZH21B Dust protector ᭺ ᭺
ZA8F Flow setting unit (for manual calibration use) ᭺ ᭺ ᭺
ZR40H Automatic Calibration unit
᭺ ᭺ ᭺ ᭺
- Calibration gas unit case (Part No. E7044KF)
᭺ ᭺
- Check valve (Part No. K9292DN, K9292DS) ᭺ ᭺
ZO21S Standard gas unit ᭺ ᭺ ᭺ ᭺
T.Int.1E
CMPL : Customer Maintenance Parts List