Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 - Manual (Page 42)

IM 11M12A01-03E 2-23
2. Specifications
2.6.2 Check Valve (Part Number: K9292DN or K9292DS)
This valve is mounted on the calibration gas line (directly connected to the detector).
This is applied to a system based on the (System 2 and 3) system configuration.
This valve prevents the process gas from entering the calibration gas line. Although it
functions as a stop valve, operation is easier than a stop valve as it does not require
opening/closing at each calibration.
Screw a check valve into the calibration gas inlet of the detector instead of the stop
valve.
Standard Specifications
Connection: Rc1/4 or 1/4FNPT
Material: SUS304 (JIS)
Pressure: 70 kPa G or more,and 350 kPa G or less
Weight: Approx. 40 g
Joint: RC 1/4, Material: SUS304 (JIS)
Joint: 1/4 NPT, Material: SUS304 (JIS)
T2.10E.EPS
Part No.
K9292DN
K9292DS
Description
K9292DN : Rc 1/4 (A part), R 1/4(B part)
K9292DS : 1/4FNPT(A part),1/4NPT(Male)(B part)
F2.11E.EPS
Approx.19 Approx.54
A
B
Unit : mm