6 other settings, 1 setting the date-and-time, Which maximum and minimum values are monitored -19 – Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 User Manual

Page 130: Setting purging -22

Advertising
background image

IM 11M12A01-03E

8-18

8.6

Other Settings

8.6.1

Setting the Date-and-Time

The following describe how to set the date-and-time. Automatic calibration or blowback
works following this setting.

Proceed as follows:
(1) Press the Setup key in the Basic panel display to display the Execution/Setup

display.

(2) Select Setup in the Execution/Setup display to display the “Commissioning” (Setup)

display.

(3) Select Others in the “Commissioning” (Setup) display. The Others display then

appears, as shown in Figure 8.15.

(4) Select Clock. The Clock display then appears, as shown in Figure 8.16.
(5) Select Set date to display the numeric-data entry display. To set the date June 21,

2000, enter 000621 and press the [Enter] key. The display then returns to the one
shown in Figure 8.16.

(5) Select Set time. Enter the time on a 24-hour basis. To enter 2:30 p.m., type in 1430

in the numeric-data entry display. Press the [Enter] key, and the time starts at 00
second.

Clock

Averaging

Fuel setup

Purging

Unit setup

Passwords

Defaults

Enter

Others

F8.13E.EPS

Enter

Set date: 2 1 / 0 6 / 0 0

Set time: 1 4 : 3 9

2 1 Jun. 2 0 0 0

1 4 : 3 0 : 0 0

Clock

F8.16E.EPS

Figure 8.15 Other Settings Figure 8.16 Clock Display

Advertising