Yokogawa Single Channel Oxygen Analyzer System ZR22/ZR402 - Manual (Page 164)

IM 11M12A01-03E 10-16
T10.5E-3.EPS
Item Data to be initialized Default setting
Alarm None
Warm-up On
Output range now being switched None
Now calibrating None
Output contact 1 Other settings Now maintenance servicing On
Blowback None
High-limit temp. alarm None
Calibration gas press. drop None
Gas leak detection None
Contact output action Open
Alarm None
Warm-up None
Output range switching None
Now calibrating On
Other settings Now maintenance servicing None
Output contact 2 Blowback None
High-limit temp. alarm None
Contacts Calibration gas press. drop None
Unburnt gas detection None
Contact output action Closed
High-high alarm None
High-limit alarm On
Output contact 3 Alarm Low-limit alarm On
Low-low alarm None
Calibration Coefficient Alarm None
Startup power stabilization timeout None
Error None
Other settings None
Contact output Closed
Input contact 1 Function None
Input contact 2 Action Closed
Averaging "Set periods over which average is One hour
calculated."
"Set periods over which max. and min. is 24 hours
stored."
Other data Temperature input mode Preset
Measurement gas temperature 300
ЊC
Measurement Temperature at 4 mA 0
ЊC
gas temperature Temperature at 20 mA 1000 ЊC
Measurement gas pressure 101.33 kPa abs.
Password Deleted