Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 130)

74 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
5
File Management
Console(config)#
This shows how to specify an FTP server where new code is stored.
Console(config)#upgrade opcode path ftp://admin:[email protected]/sm24/
Console(config)#
upgrade opcode reload
This command reloads the switch automatically after the opcode upgrade is completed. Use the no
form to disable this feature.
Syntax
[no] upgrade opcode reload
Default Setting
Disabled
Command Mode
Global Configuration
Example
This shows how to specify a TFTP server where new code is stored.
Console(config)#upgrade opcode reload
Console(config)#
show upgrade
This command shows the opcode upgrade configuration settings.
Command Mode
Privileged Exec
Example
Console#show upgrade
Auto Image Upgrade Global Settings:
Status : Disabled
Reload Status : Disabled
Path :
File Name : ECS4500_28F.bix
Console#