Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 263)

Brocade 6910 Ethernet Access Switch Configuration Guide 207
53-1002651-02
10
Web Authentication
Default Setting
3 login attempts
Command Mode
Global Configuration
Example
Console(config)#web-auth login-attempts 2
Console(config)#
web-auth quiet-period
This command defines the amount of time a host must wait after exceeding the limit for failed login
attempts, before it may attempt web authentication again. Use the no form to restore the default.
Syntax
web-auth quiet-period time
no web-auth quiet period
time - The amount of time the host must wait before attempting authentication again.
(Range: 1-180 seconds)
Default Setting
60 seconds
Command Mode
Global Configuration
Example
Console(config)#web-auth quiet-period 120
Console(config)#
web-auth session-timeout
This command defines the amount of time a web-authentication session remains valid. When the
session timeout has been reached, the host is logged off and must re-authenticate itself the next
time data transmission takes place. Use the no form to restore the default.
Syntax
web-auth session-timeout timeout
no web-auth session timeout
timeout - The amount of time that an authenticated session remains valid. (Range:
300-3600 seconds)
Default Setting
3600 seconds
Command Mode
Global Configuration