Show web-auth, Show web-auth interface, Show web-auth summary – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual
Page 266

210
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
10
Web Authentication
show web-auth
This command displays global web authentication parameters.
Command Mode
Privileged Exec
Example
Console#show web-auth
Global Web-Auth Parameters
System Auth Control : Enabled
Session Timeout : 3600
Quiet Period : 60
Max Login Attempts : 3
Console#
show web-auth interface
This command displays interface-specific web authentication parameters and statistics.
Syntax
show web-auth interface interface
interface - Specifies a port interface.
ethernet unit/port
unit - This is unit 1.
port - Port number. (Range: 1-12)
Command Mode
Privileged Exec
Example
Console#show web-auth interface ethernet 1/2
Web Auth Status : Enabled
Host Summary
IP address Web-Auth-State Remaining-Session-Time
--------------- -------------- ----------------------
1.1.1.1 Authenticated 295
1.1.1.2 Authenticated 111
Console#
show web-auth summary
This command displays a summary of web authentication port parameters and statistics.
Command Mode
Privileged Exec