Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 264)

208 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
10
Web Authentication
Example
Console(config)#web-auth session-timeout 1800
Console(config)#
web-auth system-auth-control
This command globally enables web authentication for the switch. Use the no form to restore the
default.
Syntax
[no] web-auth system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
Both web-auth system-auth-control for the switch and
web-auth for an interface must be enabled
for the web authentication feature to be active.
Example
Console(config)#web-auth system-auth-control
Console(config)#
web-auth
This command enables web authentication for an interface. Use the no form to restore the default.
Syntax
[no] web-auth
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
Both
web-auth system-auth-control for the switch and web-auth for a port must be enabled for the
web authentication feature to be active.
Example
Console(config-if)#web-auth
Console(config-if)#