Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 288)

232 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
10
ARP Inspection
Total ARP packets processed by ARP Inspection : 150
ARP packets dropped by additional validation (source MAC address) : 0
ARP packets dropped by additional validation (destination MAC address): 0
ARP packets dropped by additional validation (IP address) : 0
ARP packets dropped by ARP ACLs : 0
ARP packets dropped by DHCP snooping : 0
Console#
show ip arp inspection vlan
This command shows the configuration settings for VLANs, including ARP Inspection status, the
ARP ACL name, and if the DHCP Snooping database is used after ARP ACL validation is completed.
Syntax
show ip arp inspection vlan [vlan-id]
vlan-id - VLAN ID. (Range: 1-4093)
Command Mode
Privileged Exec
Example
Console#show ip arp inspection vlan 1
VLAN ID DAI Status ACL Name ACL Status
-------- --------------- -------------------- --------------------
1 disabled sales static
Console#