Canon imageCLASS MF7470 - Manual (Page 118)

1
2
3
4
5
6
7
8
9
10
11
4-7
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
12. Press [Reply-to].
13.
Select the reply-to address, then press [OK].
You need to store reply-to addresses in the Address Book
beforehand. (See “Storing/Editing Address Book,” on p. 4-44.)
If the desired reply-to address is not displayed, press [
▼] or [▲]
to scroll to the desired reply-to address.
Press the alphanumeric keys (e.g., [ABC]) to display the individual
keys for each letter or number. You can select a letter or number
to restrict the displayed range of entries. Press [All] to return to
the full address list.
You can also specify a fax number as the reply-to address.
You cannot select multiple destinations at the same time.
To cancel a selected reply-to address, press [Reply-to], then
[Cancel].
To view the detailed information of a selected reply-to address,
select the address, then press [Details].
14. Press the E-mail Priority drop-down list, then
select a priority for your e-mail message.
15.
Press [Done].
16. Press [File Format].
17. Select a file format for sending your document,
then press [Done].
For instructions on setting the file format, see “Setting the File
Format (imageCLASS MF7480 Only),” on p. 4-11.
–
–
–
–
–
–
–
18. Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display, then press (Start) once for
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning
is complete.
Sending an I-Fax (imageCLASS MF7480
Only)
You can scan an original, and send it to a destination via the
Internet as an I-fax. An I-fax can only be sent to machines that can
receive faxes through the Internet. You can add the document’s
name, a subject line, message body text, and reply-to address.
The following conditions are always selected:
Paper Size: LTR
This is because the sender does not know whether the recipient’s
machine can receive sizes other than LTR. Originals larger than LTR are
reduced to LTR size.
File Format: TIFF
Resolution: B&W 200 x 100 dpi or B&W 200 x 200 dpi
1.
Press (SEND).
2. Place your originals.
3. Specify the I-fax address.
4. Press [Send Settings].
5.
Press [Document Name].
■
–
–
–