Canon imageCLASS MF7470 - Manual (Page 289)

1
2
3
4
5
6
7
8
9
10
11
8-7
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
6. Press [Department ID], then enter the
Department ID using – (numeric keys).
7.
Press [Password], then enter the password using
– (numeric keys).
If you do not want to set a password, you can use the machine by
entering only the Department ID.
8. Press [Turn Limits On/Off and Set Page Limits].
9. Press [On] under the desired function(s).
<Total Print Limit> is the sum of <Copy Limit> and <Print Limit>.
10. Press [ ] next to [On]/[Off] of the desired
function(s), then enter the page limit restriction
using – (numeric keys).
The machine stops sending a fax if the Scan Limit is reached
while faxing a document either from memory or directly to the
recipient.
The machine stops scanning if the Scan Limit is reached while
the machine is scanning originals that are being fed from the
feeder. (Those originals that were scanned before the limit was
reached are not added to the scan count.)
The page limit refers to the number of printed surfaces.
Therefore, a two-sided is counted as two pages.
11. Press [OK] twice.
12. Press [Done].
13. Press [OK].
–
–
–