Canon imageCLASS MF7470 - Manual (Page 152)

1
2
3
4
5
6
7
8
9
10
11
4-41
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
12. Press the original type drop-down list, select the
original type ([Text/Photo], [Photo], or [Text]),
then press [OK].
For details about each original type, see “Original Type Selection,” on
p. 4-18.
13. Press [Done] repeatedly until the Send Basic
Features screen appears.
Initializing the Standard Send Settings
You can restore the Standard Settings to their default settings.
1. Press (Additional Functions).
2.
Press [Communications Settings] → [TX
Settings] under <Common Settings> → [ ▼] →
[Edit Standard Send Settings].
The Edit Standard Send Settings screen appears.
3.
Press [Initialize].
4. Press [Yes].
To cancel initializing the Standard Send Settings, press [No].
The message <Initialized.> appears for approximately two seconds
on the touch panel display.
5. Press [Done] repeatedly until the Send Basic
Features screen appears.