Canon imageCLASS MF7470 - Manual (Page 64)

1
2
3
4
5
6
7
8
9
10
11
2-16
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
If you are loading envelopes into the stack bypass:
Take five envelopes, loosen them as shown, and then stack them
together.
Repeat this step five times for each set of five envelopes.
Place the envelopes on a clean, level surface, and press all the
way around the envelopes by hand, in the direction of the
arrows, to remove any curls. Repeat this step five times for each
set of five envelopes.
Take particular care to spread the envelopes out in the direction that
they will be fed.
●
–
–
–
Hold down the four corners of the envelopes firmly, so that they
and the sealed or glued portion stay flat.
Do not print on the back side of the envelopes (the side with the
flap (A)).
If the envelopes become filled with air, flatten them by hand
before loading them into the stack bypass.
–
–
–