Canon imageCLASS MF7470 - Manual (Page 237)

1
2
3
4
5
6
7
8
9
10
11
6-36
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
6. On the IP Address Range Settings screen, select
the IP address or the range of IP addresses that
is to be permitted or rejected, then press
[Permit/Reject].
[Permit]: Allows the access to the machine from the selected IP
address or IP address range.
[Reject]: Rejects the access to the machine from the selected IP
address or IP address range.
If you want to delete an IPv4 address or IPv4 address range,
select the address or address range on the IP Address Settings
screen, press [Erase], then press [Yes] to delete.
If you want to edit an IPv4 address or IPv4 address range, select
the address or address range on the IP Address Settings screen,
press [Edit], edit the address or address range in the same
manner as to register them, then press [OK].
7. Press [OK].
8. Press [OK].
9. Press [Done] repeatedly until the Additional
Functions screen closes.
10. Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.
–
–
WINS Settings
WINS (Windows Internet Name Service) is a service used for
associating a NetBIOS name (which is a name of a computer or a
printer on a NetBIOS network) with a unique IP address.
1. Press (Additional Functions).
2. Press [System Settings] → [Network Settings] →
[TCP/IP Settings] → [WINS Configuration].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The WINS Configuration screen appears.
3. Select [On] or [Off] for <WINS Resolution>.
[Off ]: Does not resolve the name with WINS. Skip to step 5.
[On]: Resolves the name with WINS. Proceed to step 4.
4. Enter the IPv4 address of a WINS server using
– (numeric keys).
If DHCP determines the IPv4 address, the IPv4 address obtained from
a DHCP server is overwritten with the IPv4 address of a WINS server
(obtained from the DHCP server), whenever possible.
5. Press [OK].
6. Press [Done] repeatedly until the Additional
Functions screen closes.
7. Restart the machine.
Turn off the machine, wait at least 10 seconds, then turn it on.