Canon imageCLASS MF7470 - Manual (Page 42)

1
2
3
4
5
6
7
8
9
10
11
1-14
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Department/User ID Management
If Department ID Management or User ID Management is set to
[On] in System Settings, you must enter your ID and password
to be able to operate the machine. For details, see Chapter 8,
“System Settings.”
Procedure before Using the Machine
Department ID Management
1. Press [Department ID], then enter the
Department ID using – (numeric keys).
■
2.
If the password is set, press [password], then
enter the password using – (numeric keys).
The numbers that you enter for the password are displayed as
asterisks (*******).
3. Press (Log In/Out).
The Basic Features screen of the selected function appears on the
touch panel display.
User ID Management
1. Press [User ID].
2. Enter the User ID, then press [OK].
You can also enter the User ID using – (numeric keys).