Canon imageCLASS MF7470 - Manual (Page 264)

1
2
3
4
5
6
7
8
9
10
11
7-15
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Set ID and Password: Sets the System Manager ID and
Password to protect the contents
of <System Settings>. Once the
System Manager ID and Password
is set, they must be entered when
you access the <System Settings>
menu from the control panel, or
when you logon the Remote UI.
System Manager ID: Sets the System Manager ID (seven
digits maximum).
Set Password: Select this check box to set a
password for the System Manager
ID.
System Manager
Password: Enter a number (seven digits
maximum).
Confirm: Enter the password again. If the
number you enter here is different
from the number entered for
[System Manager Password], an
error dialog box appears.
Permit End-user’s Job
Operation: Select this check box to permit
deleting print jobs for which you
have owner privileges when the
machine is in the End-User Mode.