Loading originals, Original sizes, Orientation – Canon imageCLASS MF7470 User Manual

Page 53: Loading originals -5, Original sizes -5, Orientation -5

Advertising
background image

1

2

3

4

5

6

7

8

9

10

11

2-5

Previous

Back

Next

TOP

Before Using the
Machine

Original and Paper

Copying

Sending and
Receiving

Printing and
Scanning

Network (imageCLASS
MF7480/MF7470 Only)

Remote UI (imageCLASS
MF7480/MF7470 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Loading Originals

Place your originals on the platen glass or into the feeder,
depending on the size and type of the original, and the scan
modes that you want to use.

Platen Glass

Place the originals on the platen glass when scanning bound
originals (such as books and magazines), heavyweight or
lightweight originals, and transparencies.

Feeder

Place the originals into the feeder when you want to scan several
originals at the same time, and press (Start). The machine
automatically feeds the originals to the scanning area and scans
them. Two-sided originals can also be automatically turned over
and scanned as two-sided originals.

Original Sizes

The size of the original is automatically detected, and the document
is scanned. If the output paper in the recipient’s machine is not
equal to the scanned size, the original image may be reduced in size
or divided into smaller parts before it is sent.
The machine cannot always detect the size of the original if it is a
nonstandard paper size, such as a book. In this case, specify the size
at which you want to scan the original. (See “Document Size,” on
p. 4-15.)

Orientation

You can place an original either vertically or horizontally. Always
align the top edge of your original with the back edge of the platen
glass (by the arrow in the top left corner) or the back edge of the
feeder.

Platen Glass

Vertical Placement

Horizontal Placement

Feeder

Vertical Placement

Horizontal Placement

Advertising
This manual is related to the following products: