Canon imageCLASS MF7470 User Manual

Page 219

Advertising
background image

1

2

3

4

5

6

7

8

9

10

11

6-18

Previous

Back

Next

TOP

Before Using the
Machine

Original and Paper

Copying

Sending and
Receiving

Printing and
Scanning

Network (imageCLASS
MF7480/MF7470 Only)

Remote UI (imageCLASS
MF7480/MF7470 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

In the [New User] dialog box, enter the user name in [User name]
→ enter the password in [Password] → re-enter the password in
[Confirm password].

Enter a user name and a password not longer than 24
alphanumeric characters.
If [User must change password at next logon] is selected, any
new users added must change their passwords in order to send
data from the machine. (You cannot change the password from
the control panel.)
Confirm the settings → click [Create].
Click [Close] to close the [New User] dialog box.
Close the [Computer Management] window.



7.

Set a destination address using the control

panel.

Sample destination setting:

Server side settings:
[Full Computer Name]: starfish.organization.company.com
Create a directory named “share” in the specified FTP server’s
home directory “\Inetpub\ftproot”, then set “share” as the data
destination.
The machine’s destination settings:
The Protocol drop-down list: FTP
[Host Name]: starfish.organization.company.com
[File Path]: share
[User]: User name entered in step 6
[Password]: Password for the above user

To use [Full computer name], which was confirmed in step 4, as
the host name for [Host Name] as shown in the above example,
it is necessary to use a DNS server. (This applies even if the
machine and the FTP server are in the same subnet.) If no DNS
server is available, the host name setting should be specified
using the IP address of the FTP server.
A maximum of 120 alphanumeric characters can be entered for
both [Host Name] and [File Path].
If Language Switch in Common Settings is set to [On], the Host
Name and File Path of the file server destination may not be
displayed correctly, so you may not be able to refer to them.

Advertising
This manual is related to the following products: