Canon imageCLASS MF7470 - Manual (Page 302)

1
2
3
4
5
6
7
8
9
10
11
8-20
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Restricting the USB Interface Port
You can specify whether to accept or reject jobs by restricting
the connection to the USB port.
1. Press (Additional Functions).
2. Press [System Settings] → [ ▼ ] → [Use USB
Display].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The Use USB Display screen appears.
3. Select [On] or [Off], then press [OK].
[On]: The machine accepts jobs through the USB port.
[Off ]: The machine does not accept jobs through the USB port.
4. Press [Done] repeatedly until the Basic Features
screen appears.
The Remote UI is enabled only after you restart the machine (the
main power switch is turned off, and then back on).