Canon imageCLASS MF7470 - Manual (Page 63)

1
2
3
4
5
6
7
8
9
10
11
2-15
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Curled paper may cause a paper jam.
If there is difficulty in straightening out curled paper, curl the
front edges of the paper upward, as shown below.
To print on the back side of preprinted paper, load the preprinted
paper face up into the stack bypass, as shown in the illustration
below.
The screen for selecting the paper size appears.
–
–
When loading paper into the stack bypass, align the paper
stack neatly between the slide guides. If the paper is not loaded
correctly, a paper jam may occur.
If you are printing on heavyweight paper or envelopes using
the stack bypass, and find that the paper or envelopes are
not being fed smoothly or evenly through the stack bypass,
remove the paper or envelopes, curl the feeding edges upward
approximately 1/8" (3 mm), and then reload the paper or
envelopes. Curling the feeding edges enables the rollers to grip
the paper or envelopes as they are fed into the stack bypass.
If there are instructions on the paper package about which side
of the paper to load, follow those instructions.
When the paper is loaded into the stack bypass, the side facing
down is the one printed on.
If problems, such as poor print quality or paper jams occur, try
turning the paper stack over and reload it.
For more information on the print direction of preprinted paper
(paper which has logos or patterns already printed on it), see
“Loading Preprinted Paper,” on p. 2-23. –
–
–
–
–
–