Canon imageCLASS MF7470 User Manual

Page 352

Advertising
background image

1

2

3

4

5

6

7

8

9

10

11

10-22

Previous

Back

Next

TOP

Before Using the
Machine

Original and Paper

Copying

Sending and
Receiving

Printing and
Scanning

Network (imageCLASS
MF7480/MF7470 Only)

Remote UI (imageCLASS
MF7480/MF7470 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

#0001

Description

A paper or originals may be jammed.

Action

Remove the jammed paper or originals.

#0003

Description

An attempt was made to send a document of
17 1/8" (432 mm) or longer from the feeder.

Action

Divide the document into smaller parts and send
from the platen glass.

Description

A document takes a long time to send because it
contains too much data.

Action

Reduce the scanning resolution before sending.

Description

A document takes a long time to receive.

Action

Contact the other party and ask them to reduce
their scanning resolution or divide the document
into smaller parts for sending.

#0005

Description

The recipient did not respond within 35 seconds.

Action

Send the document again. Contact the other
party and have them check their fax machine. If
you are making an overseas call, add a pause to
the number.

Description

The other party may not be using a G3 fax
machine.

Action

Check with the other party and send the
document to a G3 fax machine. If the other party
does not have a G3 fax machine, try sending your
document using a transmission mode the other
party’s fax machine supports.

#0009

Description

The paper has run out or the paper drawer is not
set properly.

Action

Load the paper or insert the paper drawer
properly.

#0012

Description

You could not send because the recipient’s
machine is out of paper.

Action

Contact the recipient and ask them to load the
paper.

Advertising
This manual is related to the following products: