Canon imageCLASS MF7470 - Manual (Page 180)

1
2
3
4
5
6
7
8
9
10
11
4-69
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
8. Select the file format of the document you want
to forward, then press [Done].
This part of the procedure is not necessary if either of the following is
true:
A fax number is specified as the destination.
An I-fax address is specified as the destination.
If you want to separate multiple images and send them as separate
files, each of which consists of only one page, press [Divide into
Pages].
If you want to send multiple images as a single file without dividing
them, do not press [Divide into Pages].
File Formats:
[TIFF]: Forwards the file in the TIFF (B&W) format.
[PDF]: Forwards the file in the PDF format regardless of the color
mode.
You can select the file format only if you are sending the
document to an e-mail address or a file server.
To view a TIFF file, a software application that supports the TIFF
format (such as Imaging for Windows) is required.
To view a PDF file, Adobe Reader/Adobe Acrobat Reader is
required.
9. Press [OK].
10. Press [Done] repeatedly until the Send Basic
Features screen appears.
–
–
–
–
–
–
–
Checking/Changing Forwarding Settings
You can check or change forwarding settings that have been stored.
1.
Press (Additional Functions).
2. Press [System Settings] → [Forwarding Settings].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press (Log In/Out) to enter the System Settings menu.
The Forwarding Settings screen appears.
3. Select the forwarding setting whose details you
want to check, then press [Detail/Edit].
If the desired forwarding setting is not displayed, press [ ▼] or [▲] to
scroll to the desired forwarding setting.
4. Check or change the forwarding settings, then
press [OK].
For instructions on changing forwarding settings, see “Storing
Forwarding Setting,” on p. 4-65.
5. Press [Done] repeatedly until the Send Basic
Features screen appears.