Canon imageCLASS MF7470 - Manual (Page 353)

1
2
3
4
5
6
7
8
9
10
11
10-23
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
#0018
Description The recipient’s machine did not respond when
your machine retried sending documents.
Action Confirm that the recipient’s machine is able to
communicate, and try again.
Description The documents could not be sent because the
recipient’s machine was busy.
Action Confirm that the recipient’s machine is able to
communicate, and try again.
Description The settings on your machine do not match the
settings on the recipient’s machine.
Action Confirm that the recipient’s machine is able to
communicate, and try again.
Description No pause was included in the telephone number
when sending a fax overseas.
Action Insert a pause after the country code, or after the
fax number of the other party, and then dial the
number again.
Action Change the Long Distance setting on the Option
screen if you are sending documents to
destinations stored in the Address Book or one-
touch buttons. (See “Storing/Editing Address
Book,” on p. 4-45, or “Storing/Editing One-Touch
Buttons,” on p. 4-51.)
#0037
Description The memory is full.
Action Print, send, or delete any documents stored in
memory.
#0059
Description Your transmission is canceled because the
number you dialed was different from the
number registered on the other party’s fax
machine.
Action Check to see that the correct fax number is
registered on the other party’s fax machine.
#0701
Description The specified Department ID does not exist, or
the password has changed.
Action Enter the correct Department ID or password
using – (numeric keys), and try again. (See
“Department/User ID Management,” on p. 1-14.)
#0703 (for the imageCLASS MF7480 only)
Description The memory for image data is full when sending
color documents.
Action Wait a few moments, and then try sending again
after other send jobs are complete.
Action Erase documents stored in memory. If the
machine still does not operate normally, turn the
main power off, and then back on.