Canon imageCLASS MF7470 - Manual (Page 131)

1
2
3
4
5
6
7
8
9
10
11
4-20
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
4. Press [Scan Settings].
5.
Press [Option].
6. Press [Different Size Origin].
7. Select the type of original, then press [OK].
If you are placing originals with the same width, press [Same
Width].
If you are placing originals with different widths, press [Different
Width].
8.
Press [OK].
9. Press (Start).
If the original is placed on the platen glass, follow the instructions
that appear on the touch panel display, then press (Start) once for
each original. When scanning is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning
is complete.
To cancel the scan settings, press [Scan Settings], then [Option],
then [Cancel].
To cancel all settings and return the machine to the Standard
mode, press (Reset).
–
–
–
–