Canon imageCLASS MF7470 - Manual (Page 394)

1
2
3
4
5
6
7
8
9
10
11
11-11
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
Communications Settings
Setting Item Description
Common Settings Sets the features common to the fax and send functions.
TX Settings Sets the transmission features.
Unit Name Registers your name/company name (max. 24 characters, including spaces). (See “Set the
Machine for Sending Documents,” in the Starter Guide.)
Data Compression Ratio* 1 Sets the compression ratio for color scanned data. A high compression ratio reduces the amount
of memory used for the document, but results in low quality images. On the contrary, a low
compression ratio increases the amount of memory used for the document, but results in high
quality images.
High Ratio
Normal
Low Ratio –
–
–
Retry Times* 1 Sets the number of retry attempts for sending jobs to an e-mail, I-fax, or file server address. (0-5)
(See “Setting Number of Retry Attempts (E-Mail/I-Fax/File Server) (imageCLASS MF7480 Only) ,”
on p. 4-39.)
Edit Standard Send Settings Sets the default settings for sending documents. You can set the Color mode* 1 , Document Size,
File Format* 1 , Stamp, Resolution, Density, and Original Type. (See “Standard Send Settings,” on
p. 4-40.)
TX Terminal ID Sets the options for sender information.
Printing Position Selects where the sender information is printed in small type at the top of each page.
Outside
Inside –
–
Telephone # Mark Prefixes your number with the abbreviations FAX or TEL in your sender information.
FAX
TEL –
–
* 1 Indicates the item that appear only for the imageCLASS MF7480.