Canon imageCLASS MF7470 User Manual

Page 349

Advertising
background image

1

2

3

4

5

6

7

8

9

10

11

10-19

Previous

Back

Next

TOP

Before Using the
Machine

Original and Paper

Copying

Sending and
Receiving

Printing and
Scanning

Network (imageCLASS
MF7480/MF7470 Only)

Remote UI (imageCLASS
MF7480/MF7470 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Load Paper.

Description

The machine has run out of paper. No more
prints can be made.

Action

Load paper. (See “Set Up the Machine,” in the
Starter Guide.)

Description

The paper drawer is not inserted correctly.

Action

Insert the paper drawer properly. (See “Set Up
the Machine,” in the Starter Guide.)

LTR Load paper.

Description

The optimum paper size selected by the
Automatic Paper Selection mode is not available
in the machine.

Action

Load the indicated paper size into the machine. If
you press (Start) while this message is
displayed, prints are made with the currently
selected paper size.

Action

When the message continues to be displayed
even if the indicated paper size is loaded, set
Drawer Eligibility For APS/ADS in Common
Settings (from the Additional Functions screen)
for that paper drawer to [On]. (See “Automatic
Paper Selection/Automatic Drawer Switching,”
on p. 2-21.)

No response. (imageCLASS MF7480/MF7470 Only)

Description

The server was not running when you tried to
send.

Action

Check the destination.

Description

The network connection was lost when you tried
to send. (Either you could not connect to the
destination or the connection was lost before the
job could complete.)

Action

Check the status of the network.

Description

A TCP/IP error occurred when you tried to send
an e-mail or I-fax.

Action

Check that the network cables and connectors
are properly connected.

No response from the server. Check the settings. (imageCLASS
MF7480/MF7470 Only)

Description

The specified server settings are incorrect, or the
server is not turned ON. Alternatively, the
machine’s TCP/IP resources may be low.

Action

Wait for a while, and try browsing again. If you
still fail, try selecting another server.

Out of resources. Wait for a moment, then perform operation again.
(imageCLASS MF7480/MF7470 Only)

Description

You cannot browse the network due to a lack of
TCP/IP resources. This may be because
documents have just been continuously sent or
are being continuously sent through FTP or
Windows (SMB).

Action

Wait for a while, and try browsing again.

Advertising
This manual is related to the following products: