Canon imageCLASS MF7470 - Manual (Page 177)

1
2
3
4
5
6
7
8
9
10
11
4-66
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
8. Set the forwarding conditions.
If your machine is the imageCLASS MF7480 and [Fax]
is selected as the receive type, or if your machine is
imageCLASS MF7470/MF7460:
Press the Fax Number drop-down list, then select the forwarding
condition.
[disregarded]: Disregards the Fax Number information as a
forwarding condition.
[does not exist]: Forwards the document if the Fax Number
information does not exist.
[equals]: Forwards the document if the Fax Number information
matches all of the characters entered.
[differs from]: Forwards the document if the Fax Number
information differs from the characters entered.
[begins with]: Forwards the document if the Fax Number
information begins with the characters entered.
[ends with]: Forwards the document if the Fax Number
information ends with the characters entered.
[contains]: Forwards the document if the Fax Number
information contains the characters entered.
[does not contain]: Forwards the document if the Fax Number
information does not contain the characters entered.
Enter the forwarding criterion (up to 20 characters) using
– (numeric keys), then press [OK]
[Space]: Press to insert a space between numbers.
[+]: Use to insert a country code. Press [+] after the country code,
and before the fax number.
[
◀] [▶]: Press to move the position of the cursor.
[Backspace]: Press to delete the last number entered.
The forwarding conditions are set, and the display returns to the
Register screen.
●
–
–
If you want to change the criterion for the forwarding conditions
without changing the forwarding condition for the Fax Number
drop-down list, press
(Clear), enter the new criterion, then
press [OK].
The characters that can be entered are: 0 to 9, [Space], [+].
If [disregarded] or [does not exist] is selected as the forwarding
condition, you cannot enter any criteria.
If your machine is the imageCLASS MF7480 and [I-Fax]
is selected as the receive type:
Press the Destination, From, or Subject drop-down list.
[disregarded]: Disregards the Destination, From, or Subject
information as forwarding conditions.
[equals]: Forwards the document if the From or Subject
information matches all of the characters entered.
[differs from]: Forwards the document if the Destination, From, or
Subject information differs from the characters entered.
[begins with]: Forwards the document if the Destination, From,
or Subject information begins with the characters entered.
[ends with]: Forwards the document if the Destination, From, or
Subject information ends with the characters entered.
[contains]: Forwards the document if the Destination, From, or
Subject information contains the characters entered.
[does not contain]: Forwards the document if the Destination,
From, or Subject information does not contain the characters
entered.
Select the forwarding condition, then press [Set.].
Enter the forwarding criteria (up to 120 characters for the
Destination, and 128 characters for the From or Subject), then
press [OK].
–
–
–
●
–
–
–