Canon imageCLASS MF7470 - Manual (Page 134)

1
2
3
4
5
6
7
8
9
10
11
4-23
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
6. Enter the e-mail address (up to 120 characters),
then press [OK].
You can also use – (numeric keys) to enter numbers, and
(Clear) to clear your entry.
Specifying an I-Fax Address
(imageCLASS MF7480 Only)
This mode enables you to specify a new I-fax address. Regardless of
the distance and area, I-fax helps you to reduce transmission costs
by making transactions via the Internet. You can enter an I-fax
address directly from the keyboard on the touch panel display. You
can also specify the scan settings and the settings at the destination
when using I-fax.
The following conditions are always selected:
Paper Size: LTR
This is because the sender does not know whether the recipient’s
machine can receive sizes other than LTR. Originals larger than LTR are
reduced to LTR size.
File Format: TIFF
Resolution: B&W 200 x 100 dpi or B&W 200 x 200 dpi –
–
–
1. Press (SEND).
2.
Place your originals.
3. Make sure the machine is ready to send.
4. Press [New Address].
5.
Press [I-Fax].
6. Enter the I-fax address (up to 120 characters),
then press [OK].
You can also use – (numeric keys) to enter numbers, and
(Clear) to clear your entry.