Canon imageCLASS MF7470 - Manual (Page 386)

1
2
3
4
5
6
7
8
9
10
11
11-3
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Machine Settings
You can adjust the machine settings from the Additional
Functions Menu to customize the way the machine works. To
see the list of the current settings, print out USER’S DATA LIST.
Printing USER’S DATA LIST
1.
Press (Additional Functions).
2. Press [Report Settings].
3. Press [Print List].
4.
Press [User’s Data List].
5. Press [Yes].
Accessing the Additional Functions Menu
If User ID Management is set to [On], users whose user type is registered
as “User” (end user) cannot change the System Manager Settings even if
there are no System Manager ID and System Password set.
If User ID Management is set to [On], users whose user type is registered
as “Administrator” can change the System Manager Settings by entering
the System Manager ID and System Password, or registering the System
Manager ID and System Password as their user information in advance.
Settings specified from the Additional Functions screen are never
changed when you press (Reset).
1. Press (Additional Functions).
■
■
–
–
–
2. Select an Additional Functions setting.
Common Settings
Copy Settings
Timer Settings
Communications Settings
Adjustment/Cleaning
PCL Printer Settings
Report Settings
Address Settings
System Settings
3. Press a mode key to specify its settings.
For details on the setting items, see “Additional Functions Menu,” on
p. 11-5.
4.
When finished registering the settings, press
[Done] repeatedly until the Basic Features
screen appears.