Canon imageCLASS MF7470 - Manual (Page 94)

1
2
3
4
5
6
7
8
9
10
11
3-23
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
2 On 1
This setting reduces two 1-sided originals or one 2-sided original to
fit onto one side or both sides of the copy sheet.
2
1
1 2
1
Originals Copy
or
4 On 1
This setting reduces four 1-sided or two 2-sided originals to fit onto
one side or both sides of the copy sheet.
4
3
2
1
4 3
2 1
3
1
Originals Copy
or
1. Press (COPY).
2.
Place your originals.
3. Press [Special Features].
4. Press [Image Combination].
●
●
5. Select the original size , then press [Next].
If you are copying two-sided originals, press [2-Sided Original] →
select the type of two-sided original → press [OK] → [Next].
Details of each item are shown below.
[Book Type]: The front and back sides of the original
have the same top-bottom orientation.
[Calendar Type]: The front and back sides of the original
have opposite top-bottom orientations.
To select an A or B series paper size, press [A/B-size].
[2-Sided Original] cannot be selected if STMTR is the selected
original size.
6. Select the desired Image Combination feature,
then press [Next].
If you want to make two-sided copies, press [2-Sided Copy] → select
the type of two-sided orientation → press [OK] → [Next].
Details of each item are shown below.
[Book Type]: The front and back sides of the copy will
have the same top-bottom orientation.
[Calendar Type]: The front and back sides of the copy will
have opposite top-bottom orientations.
If you want to specify the image order, press [Option] → select the
image order → press [Done] → [Next].
If you do not change the image order by pressing [Option], the
images are printed as follows:
2 On 1: Left → Right
4 On 1: Upper Left → Upper Right → Lower Left
→ Lower Right
–
–