Canon imageCLASS MF7470 - Manual (Page 412)

1
2
3
4
5
6
7
8
9
10
11
11-29
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
System Settings
Allow ID Unknown Printer Jobs Sets if print jobs from computers with unknown IDs are accepted or rejected.
On
Off –
–
Allow ID Unknown Remote Scan Jobs Sets if network scan jobs from computers with unknown IDs are accepted or rejected.
Off
On –
–
User ID Management* 1 Sets if the user ID management is used.
Off
On –
–
Network Settings* 1 Sets the network setting. (See Chapter 6, “Network (imageCLASS MF7480/MF7470 Only),” or “Set
the Machine for Network Usage (imageCLASS MF7480/MF7470 Only),” in the Starter Guide.)
TCP/IP Settings Sets TCP/IP network.
IPv4 Settings Sets TCP/IPv4 network.
IP Address Settings Sets IPv4 Address settings.
IP Address Registers a fixed IPv4 address to the machine.
Subnet Mask Registers a fixed subnet mask to the machine.
Gateway Address Registers a fixed gateway address to the machine.
* 1 Indicates the item that appear only for the imageCLASS MF7480/MF7470.