Machine connection method (lpd/raw), Machine connection method (lpd/raw) -9 – Canon imageCLASS MF7470 User Manual

Page 210

Advertising
background image

1

2

3

4

5

6

7

8

9

10

11

6-9

Previous

Back

Next

TOP

Before Using the
Machine

Original and Paper

Copying

Sending and
Receiving

Printing and
Scanning

Network (imageCLASS
MF7480/MF7470 Only)

Remote UI (imageCLASS
MF7480/MF7470 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Machine Connection Method (LPD/Raw)

Connecting to a TCP/IP Network:

All computers that use the machine must have TCP/IP client
software installed and must be enabled for TCP/IP network use. For
details, see the manuals provided with the operating system.

Installing the Printer Driver and Specifying the Machine
Destination Setting:

To print from a computer, you must install a printer driver and
specify a setting for the machine destination. The machine
destination setting differs depending on the print application used
for printing. Use the following information as a guide to determine
the print application you are using, and then perform the necessary
operations.

LPD: This is the print application generally used with TCP/IP.

Raw: This is a print application used with Windows 2000/XP/
Server 2003/Vista. It can print at higher speeds than LPD.

In the following procedures, items displayed on the screen for Windows XP
are used; items might differ depending on your operating system.

1.

Open the printer properties dialog box.

For Windows Vista, click [Start] on the Windows task bar →
[Control Panel] → [Hardware and Sound] → [Printer].
For Windows 2000, click [Start] on the Windows task bar →
[Settings] → [Printers].
For Windows XP Professional/Server 2003, click [start] on the
Windows task bar → [Printers and Faxes].
For Windows XP Home Edition, click [start] on the Windows
task bar → [Control Panel] → [Printers and Other Hardware] →
[Printers and Faxes].

2.

Right-click the icon of the printer you installed

select [Properties].

3.

Display the [Ports] sheet by clicking the [Ports]

tab.

4.

Open the [Printer Ports] dialog box by clicking

[Add Port].

5.

From [Available ports types], select [Standard

TCP/IP Port] click [New Port].

The Add Standard TCP/IP Printer Port Wizard starts.

6.

Click

[Next].

Advertising
This manual is related to the following products: