Canon imageCLASS MF7470 - Manual (Page 80)

1
2
3
4
5
6
7
8
9
10
11
3-9
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
1. Press (COPY).
2.
Place your originals.
3. Press the original type drop-down list.
4. Select the original type.
5.
Press (Start).
To cancel all settings and return the machine to the Standard mode,
press (Reset).
Exposure
You can adjust the density to the most appropriate level for the
original either automatically or manually.
Adjusting Automatically
1. Press (COPY).
2. Place your originals.
3. Press [A].
The machine automatically adjusts the copy exposure to the level
best suited to the quality of the original.
An automatic copy exposure adjustment may not work with
transparencies. In this case, adjust the copy exposure manually by
pressing [Light] or [Dark].
■
4. Press (Start).
To cancel all settings and return the machine to the Standard mode,
press (Reset).
Adjusting Manually
1. Press (COPY).
2.
Place your originals.
3. Press [Light] or [Dark].
Press [Light] to move the indicator to the left to make the exposure
lighter, or press [Dark] to move it to the right to make the exposure
darker.
4. Press (Start).
To cancel all settings and return the machine to the Standard mode,
press (Reset).