Canon imageCLASS MF7470 - Manual (Page 398)

1
2
3
4
5
6
7
8
9
10
11
11-15
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
Communications Settings
Check Dial Tone Before Sending Sets whether to check the telephone line condition.
Off
On –
–
Rotate Send Sets whether to use the TX Rotation function. TX Rotation function automatically corrects the
orientation of the document by rotating the image when sending. For example, if you set a
document that has a horizontal orientation vertically on the machine, the machine rotates the
image and sends it horizontally.
You can use the TX Rotation mode for an LTR document only.
The TX Rotation mode is not available if you are using the Direct Sending or Manual Sending.
On
Off –
–
RX Settings Sets the reception features.
ECM RX Sets whether the ECM (Error Correction Mode) reception is activated.
On
Off –
–