Canon imageCLASS MF7470 - Manual (Page 69)

1
2
3
4
5
6
7
8
9
10
11
2-21
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Useful Functions
You can use the following useful functions.
Automatic Paper Selection/ Automatic
Drawer Switching
You can set which paper sources can be used for Automatic Paper
Selection (APS) and Automatic Drawer Switching (ADS). This setting
can be made independently for all the different functions of the
machine, and is especially useful when you want to use different
paper sources for different purposes.
Paper sources set to [On] are used for the following functions:
APS: The machine automatically selects the appropriate paper size
(paper source) based on the original’s size and copy ratio settings
(when making a copy), or the set ratio of the image (when receiving a
fax).
ADS: If a paper source runs out of paper during a continuous print job,
the machine automatically selects another paper source with the same
paper size, and begins feeding paper from that paper source.
1. Press (Additional Functions).
2. Press [Common Settings] → [ ▼] → [Drawer
Eligibility For APS/ADS].
The Drawer Eligibility For APS/ADS screen appears.
3. Select [Copy], [Printer], [Receive], or [Other].
■
–
–
–
4. Select [On] or [Off] for the stack bypass and the
other paper sources, then press [OK].
Details of each item are shown below.
[On]: Makes the paper source eligible for APS/ADS.
[Off ]: Makes the paper source ineligible for APS/ADS.
The numbers on the screen represent the following paper sources:
Stack Bypass
Paper Drawer 1
Paper Drawer 2
Regardless of the stack bypass setting, you cannot select [Off ]
for all of the paper sources at the same time. At least one of the
paper sources, besides the stack bypass must be set to [On].
If you selected [Printer] in step 3, the Stack Bypass icon (
) will
not be displayed on the paper select screen in step 4.
5. Press [Done] repeatedly until the Basic Features
screen appears.
–
–