Canon imageCLASS MF7470 - Manual (Page 419)

1
2
3
4
5
6
7
8
9
10
11
11-36
Previous Back Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
System Settings
Off Sets the communication mode and Ethernet type manually.
Communication Mode Selects the communication mode.
Half Duplex
Full Duplex –
–
Ethernet Type Selects the Ethernet type.
10 Base-T
100 Base-TX –
–
E-mail/I-Fax* 1 Sets detailed settings for e-mail/I-fax.
SMTP Receive Sets whether to receive e-mail/l-faxes using the machine’s own SMTP receiving function.
Off
On –
–
POP Sets whether to receive e-mail/l-faxes using a POP server.
Off
On –
–
Authentication/Encryption Specifies authenticating method before sending e-mail.
POP Authentication before Send Sets whether to use the SMTP server requires POP before SMTP (method for authenticating
users who have logged in the POP server before sending e-mail).
Off
On –
–
SMTP Authentication (SMTP AUTH) Sets whether to use the SMTP server requires SMTP Authentication (method for authenticating
users who have logged in the POP server before sending e-mail).
Off Disables SMTP Authentication.
On Enables SMTP Authentication.
User
Password –
–
SMTP Server Registers the SMTP server name.
E-mail Address Enters the e-mail address your machine will use (max. 64 characters).
* 1 Indicates the item that appear only for the imageCLASS MF7480.