Boonton 4540 Peak Power Meter User Manual - Manual (Page 103)

Boonton 4540 Series RF Power Meter
Operation 4-55
4.5.33 Display > Text Mode > Ch1|2 Options Menu
The Ch1|2 Options menu provides methods for selecting the secondary measurement/setting fields for the Modulated mode
text display.
Main Pg 2 > Display > Text Mode > Ch1|2 Options > Sec. Field 1
Description: Selects the measurement or setting to be displayed in
the lower left corner of the Modulated mode text
display.
Menu Type: Pop-up Selection.
Choices: Chan Frequency, Freq Cal Factor, Vertical Scale,
Vertical Center, dB Offset, Sensor Temp, Avg CW
Power, Max Power, Min Power, Peak/Avg, Dynamic
Range ,Marker Avg, Marker Max ,Marker Min,
Marker Pk/Avg, Marker1 Level, Marker2 Level,
Marker Delta, Marker Max Avg, Marker Min Avg,
Marker1 Min, Marker1 Max, Marker2 Min, Marker2
Max, Marker Ratio, Mark Rev Ratio, Mark Rev
Delta, CH1-CH2, CH2-CH1, CH1+CH2, CH1/CH2,
CH2/CH1, Reference 1, Reference 2, CH1/Ref1,
CH1-Ref1,
CH1+Ref1, CH2/Ref2, CH2-Ref2,
CH2+Ref2
Main Pg 2 > Display > Text Mode > Ch1|2 Options > Field 1 Chan
Description: Select channel associated with the parameter selected
by the Sec Field 1 menu.
Menu Type: Toggle.
Choices: CH 1, CH 2
Main Pg 2 > Display > Text Mode > Ch1|2 Options > Sec. Field 2
Description: Selects the measurement or setting to be displayed in the lower right corner of the
Modulated mode text display.
Menu Type: Pop-up Selection.
Choices: Chan Frequency, Freq Cal Factor, Vertical Scale, Vertical Center, dB Offset, Sensor
Temp, Avg CW Power, Max Power, Min Power, Peak/Avg, Dynamic Range ,Marker
Avg, Marker Max ,Marker Min, Marker Pk/Avg, Marker1 Level, Marker2 Level, Marker
Delta, Marker Max Avg, Marker Min Avg, Marker1 Min, Marker1 Max, Marker2 Min,
Marker2 Max, Marker Ratio, Mark Rev Ratio, Mark Rev Delta, CH1-CH2, CH2-CH1,
CH1+CH2, CH1/CH2, CH2/CH1, Reference 1, Reference 2, CH1/Ref1, CH1-Ref1,
CH1+Ref1, CH2/Ref2, CH2-Ref2, CH2+Ref2
Fig. 4-44 Ch1 | 2 Options
Menu