Boonton 4540 Peak Power Meter User Manual - Manual (Page 131)

Boonton 4540 Series RF Power Meter
Operation 4-83
4.5.53 Setup Menu
This menu provides for system preset with default parameters, pre-defined parameters or user defined parameters and
automatic acquisition of triggerable signals.
Main Pg 2 > Setup > Defaults
Description: Load the default values for all parameters.
Menu Type: Action.
SCPI Command: SYSTem:PRESet
Main Pg 2 > Setup > Preset
Description: Opens the Preset Menu.
Menu Type: Menu Selection.
SCPI Command: None
Main Pg 2 > Setup > User Presets
Description: Opens the User Preset Menu.
Menu Type: Action.
SCPI Command: None
Main Pg 2 > Setup > Auto Set
Description: Forces Pulse Mode and attemps to display a
triggered, scaled waveform from the input
signal of channels that have a calibrated peak
power sensor connected.
Menu Type: Action.
SCPI Command: None
Fig. 4-71 Setup Menu