Boonton 4540 Peak Power Meter User Manual - Manual (Page 222)

Boonton 4540 Series RF Power Meter
Remote Operation 5-88
Table 5-1. SCPI COMMAND SUMMARY (continued)
READ[1|2]:ARRay:AMEAsure:POWer?
Return new Ppeak, Pavgcyc, Pavgpulse, Ptop, Pbot, Overshoot
READ[1|2]:ARRay:AMEAsure:STATistical?
Return new Pavg, Ppeak, Pmin, PkToAvgRatio, CursorPwr,
CursorPct, Sample-Count
READ[1|2]:ARRay:AMEAsure:TIMe?
Return new Freq, Period, Width, Offtime, Dcyc, Risetime, Falltime
READ[1|2]:ARRay:CW:POWer?
Return new Pavg, Pmax, Pmin, Ppulse or Pk/Avg
READ[1|2]:ARRay:MARKer:POWer?
Return new Pavg, Pmax, Pmin, P/Avg, Pmrk1, Pmrk2,
Pmrk1/Pmrk2
READ[1|2]:CW:POWer?
Return new average reading in power units
READ[1|2]:INTERval:AVERage?
Return average power between MK1 and MK2.
READ[1|2]:INTERval:MAXFilt?
Return maximum filtered power between MK1 and MK2.
READ[1|2]:INTERval:MINFilt?
Return minimum filtered power between MK1 and MK2.
READ[1|2]:INTERval:MAXimum?
Return maximum instantaneous power between MK1 and MK2.
READ[1|2]:INTERval:MINimum?
Return minimum instantaneous power between MK1 and MK2.
READ[1|2]:INTERval:PKAVG?
Return peak to average power between MK1 and MK2.
READ[1|2]:MARKer[1|2]:AVERage? Return new reading at the specified marker.
READ[1|2]:MARKer:DELTa?
Return difference between MK2 and MK1.
READ[1|2]:MARKer[1|2]:MAXimum?
Return maximum reading at the specified marker
READ[1|2]:MARKer[1|2]:MINimum?
Return minimum reading at the specified marker
READ[1|2]:MARKer:CURsor:PERcent?
Return percent at cursor.
READ[1|2]:MARKer:CURsor:POWer?
Return relative power at cursor.
READ[1|2]:MARKer:RATio?
Return ratio between MK2 and MK1 as a percentage.
READ[1|2]:MARKer:RDELTa?
Return difference between MK1 and MK2.
READ[1|2]:MARKer:RRATio?
Return ratio between MK1 and MK2 as a percentage.
SENSe[1|2]:AVERage
Set/return trace averaging count. <numeric_value> = 1 to 16384
SENSe[1|2]:BANDwidth
Set/return sensor video bandwidth. <character data> = LOW,
HIGH
SENSe:ARRay:CALTemp?
Returns both channels’ sensor calibration temperatures.
SENSe[1|2]:CALTemp?
Returns the selected channel’s sensor calibration temperature.