4 display subsystem, Display:backlight:brightness, Display:clear – Boonton 4540 Peak Power Meter User Manual User Manual
Page 152: Display:envelope, Display:mode, 4 display subsystem -18, Display:backlight:brightness -18, Display:clear -18, Display:envelope -18, Display:mode -18
Boonton 4540 Series RF Power Meter
Remote Operation
5-18
5.6.4 DISPlay Subsystem
The DISPlay group of commands is used to control the selection and presentation of textual, graphical and TRACe
measurements.
DISPlay:BACKlight:BRIGhtness
Description:
Set or return the backlight brightness for the LCD display in percent. Zero percent turns the
backlight off.
Syntax:
DISPlay:BACKlight:BRIGhtness <numeric_value>
Argument:
<numeric_value> = 0 to 100
Valid Modes:
All
DISPlay:CLEar
Description:
Clear display traces and all data buffers for CH1 and CH2. Clears averaging filters to empty.
Does NOT clear errors.
Syntax:
DISPlay:CLEar
Argument:
None
Valid Modes:
All
DISPlay:ENVELOPE
Description:
Enable or disable the Envelope mode.
Syntax:
DISPlay:ENVELOPE <Boolean>
Argument:
<Boolean> = { 0, 1, ON, OFF }
Valid Modes:
Pulse and Modulated
DISPlay:MODE
Description:
Set or return the Text or Graphics page display setting. The Graphics page displays traces and
Marker measurements. The Text page displays auto-measure values in text form.
Syntax:
DISPlay:MODE <character data>
Argument:
<character data> = {GRAPH, TEXT}
Valid Modes:
All