36 system > i/o config menu, 36 system > i/o config menu -59, Boonton 4540 series rf power meter – Boonton 4540 Peak Power Meter User Manual User Manual
Page 107: Operation
Boonton 4540 Series RF Power Meter
Operation
4-59
4.5.36 System > I/O Config Menu
The I/O Config menu provides access to set GPIB address and configure Ethernet, and Multi IO port.
Main Pg 2 > System > GPIB Address
Description:
Set the GPIB Address. Press the menu key to obtain
the number entry popup. The address entered appears
in the menu box.
Menu Type:
Numeric Value.
Range:
1 to 30
SCPI Command:
SYSTem:COMMunicate:GPIB:ADDRess
<numeric_value>
Note
Using the SCPI command to change the GPIB bus address
while using the GPIB bus will interrupt bus communication.
Main Pg 2 > System > Ethernet
Description:
Access the Ethernet configuration menu.
Menu Type:
Menu Select.
Main Pg 2 > System > GPIB
Description:
Access the Multi IO configuration menu.
Menu Type:
Menu Select.
Fig. 4-47 I/O Config Menu