Boonton 4540 Peak Power Meter User Manual - Manual (Page 201)

Boonton 4540 Series RF Power Meter
Remote Operation 5-67
STATus:QUEStionable:EVENt?
Description: Returns the current contents of the Questionable Event register then resets the register value to 0.
The Questionable Event register contains the latched events from the Questionable Condition
register as specified by the Questionable status group’s positive and negative transition filters.
Syntax: STATus:QUEStionable:EVENt?
Returns: 16-bit register value (0 to 32767)
Valid Modes: Any
STATus:QUEStionable:NTRansition
Description: Set or return the value of the negative transition filter bit mask for the Questionable status group.
Setting a bit in the positive transition filter causes a 1 to 0 (negative) transition in the
corresponding bit of the Questionable Condition register to cause a 1 to be written in the
associated bit of the Questionable Event register.
Syntax: STATus:QUEStionable:NTRansition <numeric_value>
Argument: <numeric_value> = 0 to 32767
Returns: 16-bit register value (0 to 32767)
Valid Modes: Any
STATus:QUEStionable:PTRansition
Description: Set or return the value of the positive transition filter bit mask for the Questionable status group.
Setting a bit in the positive transition filter causes a 0 to 1 (positive) transition in the
corresponding bit of the Questionable Condition register to cause a 1 to be written in the
associated bit of the Questionable Event register.
Syntax:
STATus:QUEStionable:PTRansition <numeric_value>
Argument: <numeric_value> = 0 to 32767
Returns: 16-bit register value (0 to 32767)
Valid Modes: Any