Boonton 4540 series rf power meter, Remote operation – Boonton 4540 Peak Power Meter User Manual User Manual
Page 225
Boonton 4540 Series RF Power Meter
Remote Operation
5-91
Table 5-1. SCPI COMMAND SUMMARY (continued)
SYSTem:AUTOSET
Perform AutoSetup
SYSTem:BEEP[:ENABle]
Set/return keypad audible beeper status. <Boolean> = 0, 1, OFF,
ON
SYSTem:BEEP:IMMediate
Causes a beep to be emitted. No argument. No return.
SYSTem:COMMunicate:GPIB:ADDRess
Set or return the GPIB bus address.<numeric_value> = 1 to 30
SYSTem:COMMunicate:LAN:ADDRess
Set or return the IP address for the Ethernet port. <character data>
= instrument IP address in nnn.nnn.nnn.nnn (―dot decimal‖) format
SYSTem:COMMunicate:LAN:DGATeway
Set or return the default gateway for the Ethernet port.<character
data> = default gateway IP address in nnn.nnn.nnn.nnn (―dot
decimal‖) format
SYSTem:COMMunicate:LAN:SMASk
Set or return the subnet mask for the Ethernet port. <character
data> = subnet mask in nnn.nnn.nnn.nnn (―dot decimal‖) format
SYSTem:COMMunicate:LAN:DHCP[:STATe]
Set or return the state of DHCP/AutoIP system for the Ethernet
port.<Boolean> = 0, 1, OFF, ON
SYSTem:COMMunicate:LAN:MAC?
Return the instrument’s Ethernet MAC address.<character data> =
Ethernet MAC address in nn:nn:nn:nn:nn:nn format, where ―nn‖ is
a two-digit hexadecimal number.
SYSTem:COMMunicate:LAN:CURRent:ADDRess?
Returns the current IP address for the Ethernet port.
SYSTem:COMMunicate:LAN:CURRent:DGATeway?
Returns the current default gateway for the Ethernet port.
SYSTem:COMMunicate:LAN:CURRent:SMASk?
Returns the current subnet mask for the Ethernet port.
SYSTem:DATE:DAY
Set/get day. <numeric_value> = 1 to 31
SYSTem:DATE:MONTH
Set/get month. <numeric_value> = 1 to 12
SYSTem:DATE:WEEKday?
Get day of week. <numeric_value> = 1 to 7, Sunday thru Saturday
SYSTem:DATE:YEAR
Set/get year. <numeric_value> = 2000 to 2100
SYSTem:DISPlay:BMP?
Returns the display image in bitmap format
SYSTem:ERRor
Return system error code and description
SYSTem:ERRor[:NEXT]
Return system error code and description
SYSTem:ERRor:CODE
Return system error code
SYSTem:LANGuage
Set/return the current remote language. <character data> = SCPI
SYSTem:PRESet
Set instrument to default conditions.
SYSTem:TIMe:HOUR
Set/get hour. <numeric_value> = 0 to 23