Boonton 4540 series rf power meter, Operation – Boonton 4540 Peak Power Meter User Manual User Manual
Page 57
Advertising
Boonton 4540 Series RF Power Meter
Operation
4-9
Main > Measure > Clear
Description:
Clear display traces and all data buffers for CH1 and CH2. Clears averaging filters to
empty.
Menu Type:
Action.
SCPI Command:
DISPlay:CLEar
Main > Measure > Single Sweep ( Pulse Mode only )
Description:
Starts a single measurement cycle in Pulse mode. Enough trace sweeps must be triggered
to satisfy the channel averaging setting.
Menu Type:
Action.
SCPI Command:
INITiate[:IMMediate[:ALL]]
Main > Measure > Auto Set ( forces Pulse Mode )
Description:
Perform the Auto Setup function to acquire a signal and display the trace in the Pulse
Mode. Note: Pulse Mode is forced if not already set.
Menu Type:
Action.
SCPI Command:
SYSTem:AUTOSET
Advertising