Read:marker:cursor:percent, Read:marker:cursor:power, Read:marker:ratio – Boonton 4540 Peak Power Meter User Manual User Manual
Page 184: Read:marker:cursor:percent? -50, Read:marker:cursor:power? -50, Read:marker:ratio? -50, Boonton 4540 series rf power meter, Remote operation
Boonton 4540 Series RF Power Meter
Remote Operation
5-50
READ:MARKer:CURsor:PERcent?
Description:
Return the CCDF cursor y-axis position in percent with respect to the value set by
MARKer:POSItion:POWer (CCDF cursor mode is set to Power Ref). If CCDF cursor mode is
Percent, returns user setting. See MARKer:POSItion:POWer and MARKer:POSItion:PERcent.
See also Section 6.4 Statistical Mode Automatic Measurements for more information.
Syntax:
READ[1|2]:MARKer:CURsor:PERcent?
Returns:
CC, percent CCDF
Where CC is the measurement condition code.
Valid Modes:
Statistical.
READ:MARKer:CURsor:POWer?
Description:
Return the CCDF cursor x-axis position in relative power with respect to the value set by
MARKer:POSItion:PERcent (CCDF cursor mode is set to Percent). If CCDF cursor mode is
Power Ref, returns user setting. See MARKer:POSItion:POWer and MARKer:POSItion:PERcent.
See also Section 6.4 Statistical Mode Automatic Measurements for more information.
Syntax:
READ[1|2]:MARKer:CURsor:POWer?
Returns:
CC, relative power (dBr) CCDF
Where CC is the measurement condition code.
Valid Modes:
Pulse and Modulated.
READ:MARKer:RATio?
Description:
For the specified channel return the ratio of MK1 to MK2. The units will be dB for logarithmic
units or percent for linear units.
Syntax:
READ[1|2]:Marker:RATio?
Returns:
CC, MK1/MK2
Where CC is the measurement condition code.
Valid Modes:
All