Boonton 4540 Peak Power Meter User Manual - Manual (Page 224)

Boonton 4540 Series RF Power Meter
Remote Operation 5-90
Table 5-1. SCPI COMMAND SUMMARY (continued)
SENSe:MBUF:COUNt
Set/return number of buffer points to be returned for each query.
<numeric_value> = 1 to 4096 points
SENSe[1|2]:MBUF:INDEX
Set/return measurement buffer read index for selected channel.
<numeric_value> = 0 to 1048575
SENSe[1|2]:MBUF:MEASurement
Return measurement buffer array for selected channel.
SENSe[1|2]:MBUF:DATA?
Set/return measurement buffer read index for selected channel.
<numeric_value> = 0 to 1048575
STATus:DEVice:CONDition?
Return value of device condition Register
STATus:DEVice:ENABle
Set/return value of device enable mask
STATus:DEVice:EVENt?
Return value of device event register
STATus:DEVice:NTRansition
Set/return the negative transition filter
STATus:DEVice:PTRansition
Set/return the positive transition filter
STATus:OPERation:CONDition?
Return value of Operation Condition Register
STATus:OPERation:ENABle
Set/return value of Operation Enable Mask
STATus:OPERation:EVENt?
Return value of Operation Event Register
STATus:OPERation:NTRansition
Set/return the negative transition filter
STATus:OPERation:PTRansition
Set/return the positive transition filter
STATus:PRESet
Set device dependent SCPI registers to default states
STATus:QUEStionable:CALibration:CONDition? Return value of the questionable calibration condition register
STATus:QUEStionable:CALibration:ENABle Set/return value of the questionable calibration enable mask
STATus:QUEStionable:CALibration:EVENt? Return value of the questionable calibration event register
STATus:QUEStionable:CALibration:NTRansition Set/return the negative transition filter
STATus:QUEStionable:CALibration:PTRansition Set/return the positive transition filter
STATus:QUEStionable:CONDition?
Return value of Questionable Condition Register
STATus:QUEStionable:ENABle
Set/return value of Questionable Enable Mask
STATus:QUEStionable:EVENt?
Return value of Questionable Event Register
STATus:QUEStionable:NTRansition
Set/return the negative transition filter
STATus:QUEStionable:PTRansition
Set/return the positive transition filter