Videotec DCT - Manual (Page 10)

1 OPENING AND CHECKING THE PACKAGE
1.1 Symbols used
The graphics symbols used in this handbook have the following meanings.
Operations to be carried out with the power supply disconnected, unless specified otherwise..
Installation should be carried out only and exclusively by skilled, authorised technicians.
Technical note or hint on use.
1.2 Contents of the package
Make sure the package is intact and has no obvious signs of dropping, scrapes or scratches. If the package is
damaged contact the supplier immediately.
Make sure the contents correspond to the list below:
 1 keyboard
 1 external power supply
 6 telephone cables, 6/6 point-to-point, length approx. 150 cm
 6 RJjack shunt boxes
 1 RS232 connection cable for personal computer
 1 CD-ROM for auxiliary Personal Computer during keyboard setup
 This user's handbook
1.3 Checking the markings
Before proceeding with installation, make sure the supplied material corresponds with the required
specifications by examining the marking labels, as described in § 1.4 - Description of the labels, page 8.
Never, under any circumstances, make any changes or connections that are not described in this
handbook: the use of inappropriate appliances may expose personnel and the system to serious
safety hazards.
1.4 Description of the labels
Underneath the keyboard there is a label conforming to CE markings, showing the data regarding the model
identification code and the serial number (EXT 3/9 bar code)
The power supply provided with the keyboard shows the information regarding the electrical specifications of
the keyboard power supply.
Page 8 of 176 MNVADCT03_0716