Videotec DCT - Manual (Page 148)

7.4.2.1 Programme structure
When the programme is started the first graphics window is as follows.
The window is divided into five areas:
Main menu, toolbar and text area. The text
area is in turn divided into two windows (a
reference and an edit window) that can be
selected using the tabs.
1. Main menu
2. Toolbar
3. Selection tabs
4. Reference window
5. Edit window
At this point the user either picks up the strings from the keyboard (by clicking on the icon) or loads an
existing file (clicking on the icon). The result of either operation will be a graphics window with the
following appearance:
7.4.2.2 Main menu
This comprises the following fields:
Text
management
Receive from
keyboard via the serial port, downloads the strings from the keyboard
Load from file loads the strings saved previously in a file
Send to keyboard via the serial port, sends the strings to the keyboard
Save on file saves the file of current strings
Special characters loads the window of special characters that cannot be selected from
the keyboard
COM Port for selecting the serial port to be used for transferring the file
Language for choosing the language used by the programme
Exit closes the programme without saving the open file
Info provides information on the programme version
Page 146 of 176 MNVADCT03_0716
4
2
3
1
5