Videotec DCT - Manual (Page 92)

6.5.5 Patrol
In the Main menu press the PATROL key to enter the menu for carrying out the movement controls.
START PATROL
To start the corresponding function.
The Special codes are used to set up the patrol sequence positions.
6.5.6 Preset, Scan and Home
The PRESET, SCAN and HOME functions are described in sections (§ 4.4.1.1 - PRESET, page 46 and §
4.4.2 - SCAN MENU, page 48).
Refer to § 9.2.1 – Dome, page 165 to check the specific limits of the dome.
Page 90 of 176 MNVADCT03_0716