Videotec DCT - Manual (Page 132)

6.17.5 Patrol
In the Main menu press the PATROL to enter the menu for carrying out the specific function.
START PATROL / RANDOM
To start the corresponding function.
STOP PATROL / RANDOM
To stop the corresponding function.
SETUP PATROL / RANDOM
To enter the setup menu for the corresponding
function.
6.17.5.1 Setup Standard PATROL
The PATROL sequence comprises a series of Preset positions that are reached in succession with the same
dwell time for each position. The Standard PATROL can have a maximum of 64 positions.
Proced ure for defining a PATROL:
 Select field 1, press the “ ent ” key set and insert the number of the desired Preset position.
 Select field 2, press the “ ent ” key set and insert the number of the desired Preset position.
 Select field 3, press the “ ent ” key set to send the configuration to the receiver.
 Select field 4, press the “ ent ” key set and insert the desired dwell time.
 Select field 5, press the “ ent ” key set and insert the desired speed value.
 Select field 6, press the “ ent ” key set and insert the desired speed value.
Press the “ esc ” key to return to the PATROL page
Page 130 of 176 MNVADCT03_0716